PE sealing foil
Part-No.: 900110
Packing Unit (Qty): 100 pcs./pack
- Peeling foil -
Format: SBS-standard, glue with medium solvent resistance. Temperature range: -5 °C to +40 °C
Application
PE foil for sealing of microtitre plates. Can be peeled without residue, especially suitable for plate storage at room temperature.
Aluminium sealing foil (gold)
Part-No.: 900251
Packing Unit (Qty): 100 pcs./pack
- Peeling foil -
Format: SBS-standard, glue with medium solvent resistance (e.g. DMSO-resistant). Temperature range: -80 °C to +100 °C
Application
A PE-plastic is laminated on the aluminium. Consequently, there is no tearing of the foil during residuelessly pull-off. Suitable as peeling foil for storage of microtitre plates at lowest temperatures, as peeling-foil for PCR-plates.
Aluminium sealing foil
Part-No.: 900300
Packing Unit (Qty): 100 pcs./pack
- Piercing- and peeling foil -
Format: SBS-standard, glue is high solvent resistant (e.g. DMSO-resistant). Temperature range: -80 °C to +100 °C
Application
Aluminium foil for all applications (e.g. storage of microtitre plates, PCR, etc.). Foil can be pierced.
Polyolefine sealing foil
Part-No.: 900320
Packing Unit (Qty): 100 pcs./pack
- Peeling foil -
Format: SBS-standard, glue with high solvent resistance (e.g. DMSO-resistant). Temperature range: -70 °C to +100 °C
Application
The glue is inside of microcapsules, to be opened by pressure. Glue only affects the plastics of the microtire plate. There is no glue inside the wells. Polyolefine foil is used if the specimen may not get into contact with the glue.
Particularly suitable for protein crystallization.
Foam sealing foil
Part-No.: 900351
Packing Unit (Qty): 50 pcs./pack
- Piercing- and peeling foil -
Format: SBS-standard, glue with good biological solvent resistance. Temperature range: -50 °C to +60 °C
Application
The foam is pierceable with a needle (dispenser or pipette) or a small pipette tip. After removing the needle or tip from the foil, the hole closes again by itself.
Polyolefine sealing foil - permeable -
Part-No.: 900371
Packing Unit (Qty): 50 pcs./pack
- Peeling foil -
Format: SBS-standard, glue with high solvent resistance (e.g. DMSO-resistant). Temperature range: -70 °C to +100 °C
Application
Polyolefine foil with small holes to allow a good gas exchange.
The glue is stored inside of microcapsules, to be opened by pressure. The glue only affects the plastics of the microtire plate. There is no glue inside the wells. Polyolefine foil is used if the specimen may not get into contact with the glue. Particularly suitable for protein crystallization.
Nonwoven foil
Part-No.: 900391
Packing Unit (Qty): 50 pcs./pack
Format: SBS-standard, permeable liquid-tight foil, with evidently good gas exchange.
Glue with good biological solvent resistance. Temperature range: -5 °C to +60 °C.
Application
Specimen with requested good growth (cells, bacteria, etc.).
Nonwoven foil is suitable for usage in autoclaves or similar equipment.
Polypropylene foil
Part-No.: 900510
Packing Unit (Qty): 100 pcs./pack
- Peeling foil -
Format: SBS-standard, glue with high solvent resistance (e.g. DMSO-resistant). Temperature range: -80 °C to +100 °C
Application
Visually clear polypropylene foil - Usage with photometer plates up to 276 nm.
To be used as sealing foil for assay-plates, storage plates etc and peeling foil for PCR plates.
Black PE Sealing Foil
Part-No.: 900559
Packing Unit (Qty): 100 pcs./pack
- Peeling foil -
Format: SBS-standard, glue with good biological solvent resistance. Temperature range: -40°C to +80°C
Application
This black foil seals microtitre plates, deep well plates and special plates absolutely light tight.
Even with heavy fluorescence light and laser light the foil does not leak any light or stray light.
