Foil rolls

Inert sealing foils for all microtitre plates, deep well plates as well as some special plates.

Aluminium sealing foil (gold)
Part-No.: 900250
Packing Unit (Qty): 100 m per roll
- Peeling foil -
Glue with medium solvent resistance (e.g. DMSO-resistant). Temperature range: -80 °C to +100 °C
Application
A PE-plastic is laminated on the aluminium. Consequently, there is no tearing of the foil during residuelessly pull-off. Suitable as peeling foil for storage of microtitre plates at lowest temperatures, as peeling-foil for PCR-plates.


Aluminium sealing foil
Part-No.: 900310
Packing Unit (Qty): 100 m per roll
- Piercing foil -
Glue is high solvent resistant (e.g. DMSO-resistant). Temperature range: -80 °C to +100 °C    
Application
Aluminium foil for all applications (e.g. storage of microtitre plates, PCR, etc.). Foil can be pierced.


Foam sealing foil
Part-No.: 900350
Packing Unit (Qty): 33 m per roll
- Piercing- and peeling foil -
Glue with good biological solvent resistance. Temperature range: -50 °C to +60 °C
Application
The foam is pierceable with a needle (dispenser or pipette) or a small pipette tip. After removing the needle or tip from the foil, the hole closes again by itself.


Polyolefine foil
Part-No.: 900360
Packing Unit (Qty): 100 m per roll
- Peeling foil -
Glue with high solvent resistance (e.g. DMSO-resistant). Temperature range: -70 °C to +100 °C
Application
The glue is inside of microcapsules, to be opened by pressure. Glue only affects the plastics of the microtire plate. There is no glue inside the wells. Polyolefine foil is used if the specimen may not get into contact with the glue. Particularly suitable for protein crystallization.


Polyolefine sealing foil - permeable -
Part-No.: 900370
Packing Unit (Qty): 100 m per roll
- Peeling foil -
Glue with high solvent resistance (e.g. DMSO-resistant). Temperature range: -70 °C to +100 °C
Application
Polyolefine foil with small holes to allow a good gas exchange.
The glue is stored inside of microcapsules, to be opened by pressure. The glue only affects the plastics of the microtire plate. There is no glue inside the wells. Polyolefine foil is used if the specimen may not get into contact with the glue. Particularly suitable for protein crystallization.


Nonwoven foil
Part-No.: 900390
Packing Unit (Qty): 100 m per roll
Permeable, liquid-tight foil, with evidently good gas exchange.
Glue with good biological solvent resistance. Temperature range: -5 °C to +60 °C.
Application
Specimen with requested good growth (cells, bacteria, etc.). Nonwoven foil is suitable for usage in autoclaves or similar equipment.


Polypropylene foil
Part-No.: 900500
Packing Unit (Qty): 100 m per roll
- Peeling foil -
Glue with high solvent resistance (e.g. DMSO-resistant). Temperature range: -80 °C to +100 °C
Application
Visually clear polypropylene foil - Usage with photometer plates up to 276 nm.
To be used as sealing foil for assay-plates, storage plates etc and peeling foil for PCR plates.

en_GB