HJ@Sealer

HJAdSealerLogo

Fully automated Sealer for Microtitreplates

fully automated - fast - small footprint - all purpose

Specifications:
The "HJ@Sealer" is always used where sealing of microtitre-, PCR-, as well as special plates shall take place in a fully automated- as well as manually controlled process.

Small footprint:	The "HJ@Sealer" requires a footprint of 212mm by 250mm adjacent to the pipetting- or robotic system. The floor space required on the worktable of the robotic system is only a little bigger than the dimension of the plate.
Automatic plate recognition:	The "HJ@Sealer" automatically recognizes the fed plate and seals it reliable without any overlap of the foil. Automated, in this context, does not bring any limitation: It is however possible to adjust sealing parameters like sealing pressure and possibly required foil overlap and so on. The "HJ@Sealer" can then recognize different plates by their height.
Integration without problems:	The "HJ@Sealer" can be easily integrated into new and existing pipetting machines and robotic systems. The integration interface is compatible with our successful RoboSeal sealing robot.
Optional software control:	The "HJ@Sealer" software is compatible with all Microsoft Windows operating systems starting from Windows 2000 including Windows 10. The software contains a user friendly interface. Diagnostic functions, like foil-sheet counter, foil end sensor and cutter break diagnostics allow a high level of operating reliability.
Interface:	The "HJ@Sealer" is fitted with an USB- as well as RS-232 interface. Controlling the sealer via TTL signal lines is also possible.
Easy operation:	Plates are recognized automatically. Whether it is about shallow well-, deep well-, PCR- or other plate, additional adapters are not necessary.
Secure Sealing:	The adhesive sealing foil is sticked to the plate by pressure. In that way disadvantages owing to heat impression and problems of bad adhesion between plate and foil can be completely excluded.
Fast:	The complete sealing cycle takes about 8 seconds.
Cost effective:	Convenient initial cost, low integration expenditure as well as foil material favorable in price.

Device details:

Look how the HJ@Sealer operates

Integration example

Dimensioned 3D drawing and footprint (PDF file)

Order information:

Part Nbr.	Description	Packing unit (Qty)
200 920	"HJ@Sealer semi-automatic" Automatic Sealer for Microtitreplates	1
200 925	„HJ@Sealer robotic" Robotic Sealer for Microtitreplates	1

Bio-inert sealing foils for all microtitreplates, deep well plates, PCR-plates, BioChips etc.:

Part Nbr.	Description	Application	Packing unit (Qty)
900 250	Aluminium sealing foil (gold) - Peeling foil - Glue with medium solvent resistance (e.g. DMSO-resistant) Temperature Range: -80°C to +120°C	A PE-plastic is laminated on the Aluminium. Consequently there is no tearing of the foil during residuelessly pull-off. Suitable as peeling-foil for storage of microtitreplates at lowest temperatures, as peeling-foil for PCR-plates.	100 m/Roll
900 310	Aluminium sealing foil - Piercing-Foil - Glue is high solvent resistant (e.g. DMSO-resistant) Temperature Range: -80°C to +120°C	Aluminium foil for all applications (e.g. storage of microtitreplates, PCR, etc.). Foil can be pierced.	100 m/Roll
900 350	Foam sealing foil - Peeling-and piercing-foil - Glue with high biological solvent resistance Temperature range: -50°C to +60°C	The Foam is pierceable with a needle (dispenser or pipette) or a small pipette tip. After extricate the needle or tip from the foil the hole closes again by itself.	33 m/Roll
900 360	Polyolefin foil - Peeling foil - Glue is high solvent resistance (e.g. DMSO-resistant) Temperature Range: -25°C to +120°C	Glue inside of microcaps, to be opened by pressure. Glue only affects the plastics of the microtireplate. There is no glue inside of the wells. Polyolefin foil is used if the specimen may not encounter the glue. Particularly suitable for protein crystallization.	100 m/Roll
900 370	Polyolefin sealing foil - permeable - - Peeling foil - Glue is high solvent resistant (e.g. DMSO-resistant) Temperature Range: -25°C to +120°C	Polyolefin foil with small holes in order to ensure a good gas exchange. Glue inside of microcaps, to be opened by pressure. Glue only affects the plastics of the wells. There is no glue inside of the wells.	100 m/Roll
900 390	Nonwoven foil permeable, liquid-tight foil, with evidently good gas exchange. Glue is high biological solvent resistant Temperature Range: -5°C to +60°C	Specimen with requested good growth (cells, bacteria, etc.). Nonwoven foil is suitable for usage in autoclaves similar equipment.	100 m/Roll
900 500	Polypropylene foil - Peeling foil - Glue is high solvent resistant (e.g. DMSO-resistant) Temperature Range: -80°C to +120°C	Visually clear Polypropylene foil Usage with photometer plates up to 276 nm. To be used as sealing foil for assay- plates. Polypropylene foil for storage plates etc. Peeling foil for PCR plates.	100 m/Roll
900 555	Black PE Sealing foil - Peeling foil - Glue is good biological solvent resistant Temperature range: -40°C bis +60°C	This black foil seals with microtitreplates, deep well plates and special plates absolutely light tight. Even at heavy fluorescence light and laserlight the foil does not let pass any light or stray light.	100 m/Roll